More demo today. Pulled all sorts of fasteners out of the boat. I made templates of all the pars and took measurements of everything I could think of. It will help me but I don't know if it will help anybody else but at least i have them. The framing is standard 2x6 construction lumber and the bottom is 3/4 ply. I'm guessing the tub is 1/2 inch ply.Nothing is straight but it's mostly solid. On these the deck is fastened directly to the bottom with nails and screws and fiberglass was applied to that edge. I think I will install a chime log and give the future fasteners more bite
DHBP Member since May 1999