Need Assistance locating decoys for purchase

When using the urethane foam in the aluminum molds, you must be aware of volume. One of my friends ran into the situation where too much pressure was exerted by the expanding foam and turned the mold into Shrapnel and did some damage.
Be careful.
Lou
 
Lou, do you know if he drilled any vent holes in the aluminum molds?
Click to expand...

Hi Phil,
I do not know if vent holes were drilled or not. There are times where even those can clog due to the temp. difference and cure rate.
Lou
 
You must log in or register to reply here.
Back
Top