Decoy carvers, particularly Alabama...

Rick Pierce

Well-known member
I am helping Bill McAdam's wife liquidate his carving supplies and equipment. She is located in Huntsville, Alabama.

If you are interested in anything, please send me a message and let me know. This is the first round of "stuff"; I will post more as I have time.

Cork:

2 full sheets, 3" @$60 each

1 full sheet 3.5" @ $75

2 full sheets 4.5" (marked 4-5/8 on the sheets) @ $85 each.

All are high density tan cork, similar to currently available from The Duck Blind, etc.

4 basswood blocks 3.75x3.75x18" @ $10 each

Central machinery 14" bandsaw with riser and 4 unopened 105" blades; table has some rust and machine needs to be cleaned up. Saw $200, blades $60 for the 4.

TJL 1 hp dust collector with 1 hose, needs to be cleaned up, $100.

Central machinery, small bench drill press $50

She would prefer pickup rather than shipping, particularly on the tools. If something is shipped, it will be at purchaser's expense.
 
I'm in Huntsville and would be interested in some cork and head blocks. I have a buddy who might be interested in the tools as well. Please drop me a line if these items are still available.

Grace and peace,

David
 
The 4.5" cork is sold.

One sheet of 3.5" is sold.

The rest is available, and I believe there are three pieces of basswood and one of tupelo his wife found in their garage. Bass is 30x7.5x4 thick, tupelo is 24x6x3.5 thick.
 
Back
Top