Completely NDR but I know someone can help

Mark W

Well-known member
I am looking for a small screw manufacturer or a distributor of very small screws. Here is what I am looking for.

M1.4 Trapezoidal Thread
Pitch 0.25mm
Thread angle: 60?

Thread diameter: M1.4 (1.2mm, trapezoidal)
Screw length: 3mm
Head: 4.15mm x 0.65mm

While I believe these specs to be accurate, may be off slightly. Current head is a Phillips head and I want to have either a torx head or something less prone to stripping the head. I have a few current screws I am trying to replace that I can send or bring to the manufacturer or distributor so they can ensure my measurements are accurate.

Thanks -

Mark

 
Last edited:
Mark,

I checked McMaster but they don't seem to have what you are looking for.

https://www.mcmaster.com/screws/thread-size~m1-4/

Are these custom screws?
 
Richard Lathrop said:
Richard Lathrop said:
I checked McMaster but they don't seem to have what you are looking for.

https://www.mcmaster.com/screws/thread-size~m1-4/

Are these custom screws?


I am looking to replace the screw mentioned but with a different head type. Screws are already used in a product but everyone is having issues with the phillips head. I found a company that has them but they say they are worth $1.5 each and I need to order 1000. the quantity isn't an issue but that price is outrageous. Should be a few pennies if even.



Mark
 
Back
Top